Arctic Alumina Thermal Adhesive is a two part
permanent adhesive for thermal joints in minimum bond line applications. It is
NOT intended to be used between a CPU and the CPU heatsink. On a CPU please use
a thermal compound such as Arctic Silver 5,
Céramique 2, Arctic Alumina or
Matrix. For proper use refer to the instructions here.
Arctic Alumina Adhesive uses a
aluminum oxide and boron nitride.
- 40C to >150C (Bond strength is
slightly weakened at temperatures below 0C due to
Pure Electrical Insulator:
Arctic Alumina Adhesive is
a pure electrical
electrically conductive nor capacitive.
A set of Arctic Alumina Thermal
Adhesive consists of two syringes containing a total of 5 grams of
adhesive (2.5 grams each of parts
A and B) and a plastic
reusable mixing wand. Approximately 3cc total adhesive.
Although lighter per set than
Arctic Silver Adhesive due to its use of ceramics rather than silver, each
set of Arctic Alumina Adhesive
contains the same amount of
adhesive by volume as a set of Arctic Silver adhesive and will cover the
Arctic Alumina Thermal Adhesive should be kept cold and
away from UV light (sunlight and florescent lighting). We recommend
refrigerating the unused material and allowing it to come to room
temperature prior to use.
Arctic Alumina Thermal Adhesive
is a permanent adhesive. Components you attach with Arctic Alumina Thermal