our customers say...
brands
free shippingJBLAcardLexmarkbrand-hpbrand-alerabrand-msiBrand-Aopenbrand-asusDellEpsonbrand-ez-dupeJVCpioneerGarminsamsung logotoshibasony

Sunbeam Cold Cathode System Cooler - Sunbeam Round Green Cold Cathode (CCFL) Fan - 80MM

Sunbeam Cold Cathode System Cooler - Sunbeam Round Green Cold Cathode (CCFL) Fan - 80MM  - Click to enlarge
Item #:
MHL-FNNKAB800CCFLSWTGRN
Suggested Retail Price:
$25.00
Amamax Special Sale Price:
$7.99
Availability:
In Stock
Quantity:
Send Page to Friend

These fans use a UV cold cathode bulb and the fan casing is very UV sensitive to fully "glow" in dark conditions. They are a great addition to any case. They are very bright and can add light to dark areas or can even replace the lights you already have. The dual invertor can run 2 fans or 1 fan and a 12 inch tube. The fans come with 12 inch wires that runs to the invertor and 18 inch wires that run to the power with a 3 pin and 4 pin connector. The switch plate fits into a PCI slot and has 20 inch wires for power and 18 inch for the invertor. This gives you plenty of wire to put the invertor just about anywhere in your case you might want. The switch plate itself eliminates the need to drill a hole for the switch. These kits are very well built and priced cheap enough to fit all budgets.

Specifications:
Diameter of Round Cold Cathode: 8cm
Input voltage:12V
Output Voltage: 620V
Power compsumption:2.4watts
Current Draw: 0.005A
Brightness: 28,000 cd/m2
Specifications(Fan)
Bearing Type: Sleeve
Fan Dimension: 80 x 80 x 25mm
Rated Voltage: 10.2 - 13.8VDC
Current Draw: 0.13A
Power Consumption: 1.56Watts
Air Flow: 31.73CFM
Rotation Speed: 2700RPM
Noise Level: 28dB(A)
Features:
Dual Inverter for two lamps
High Brightness
High Reliability
Long Lifetime
Lower Power Consumption
Retail Box Design

Installation:

1. Turn Off your computer
2. Mount Round Cold Cathode Casing on Fan with Screws
3. Mount Fan on Your Case
4. Plug Round Cold Cathode with Inverter
5. Plug wire harness (or sound module) into inverter on the other side
6. Plug the 4-Pin Male Molex connector into Power Supply
7. Find a desired Place and Mount Inverter with Adhesive Velcro Tape
8. Install the Front Switch / Sound Control Module by Drilling a Hole on FacePlate or Back Switch on Back Slot
9. Turn On the Computer and Enjoy the Fantastic Light

Package Type:
Retail Box Package



you may also be interested in . . .




Also in the Sunbeam Cold Cathode System Cooler - Sunbeam Round Green Cold Cathode (CCFL) Fan - 80MM category...
CoolerMax 80mm Sleeve Bearing Case Cooling Fan, 12V with 4-pin Connectors
CoolerMax 80mm Sleeve Bearing Case Cooling Fan, 12V with 4-pin Connectors
60mm Sleeve Bearing Case Cooling Fan for Computer System
60mm Sleeve Bearing Case Cooling Fan for Computer System
120mm Sleeve Bearing Case Cooling Fan for Computer System
120mm Sleeve Bearing Case Cooling Fan for Computer System
Sunbeam Cold Cathode System Cooler - Sunbeam Round Green Cold Cathode (CCFL) Fan - 80MM
Sunbeam Cold Cathode System Cooler - Sunbeam Round Green Cold Cathode (CCFL) Fan - 80MM
Sunbeam Cold Cathode System Cooler - Sunbeam Round Orange Cold Cathode(CCFL)Fan - 80MM
Sunbeam Cold Cathode System Cooler - Sunbeam Round Orange Cold Cathode(CCFL)Fan - 80MM
*12CM/ 120MM Chrome (Blue / Silver) Case Fan for Computer Systems
*12CM/ 120MM Chrome (Blue / Silver) Case Fan for Computer Systems
Computer Systems Fan Card Cooler - Powmax (FANCARD-2) 80mm Red Quad LED Fan Card Cooler Retail
Computer Systems Fan Card Cooler - Powmax (FANCARD-2) 80mm Red Quad LED Fan Card Cooler Retail
Computer Systems Fan Card Cooler - Powmax (FANCARD-2) 80mm Red Quad LED Fan Card Cooler Retail
View all in this category »