FIRMWARE
DOWNLOAD
Click
to download
Apollo
Series Controller -
Version 1.49 (Apollo D4, D5, D7, D9, D10)
Apollo II Series
Controller - Version 4.12 (Apollo D4, D7, D11)
Athena Series Controller
(CD) - Version 1.73
(Athena CD3, CD7, CD11)
Athena Series Controller
(DVD) - Version 1.73
(Athena D3, D4, D7, D9, D11, D15)
Athena II 32 Series
Controller - Version
2.12.1 (D4, D7, D11)
Athena II 64 Series
Controller - Version
2.12.1 (D4, D7, D11)
Athena PLUS
Controller - Version
1.73 (Athena PLUS)
Coolcopy
Series Controller -
Version 1.75 (CD7, D1, D3, D7, D9)
Wytron
Series Controller -
Version 3.39 & 3.35 (DVD688, DVD668)
The
firmware for Athena Series and Apollo Series can be burned to the same disc, and
the controllers will the find its proper firmware. Athena PLUS firmware must be
burned seperately.
Unzip
Firmware
Windows
95/98/ME/XP/Vista and with the WinZip software installed in the computer,
perform ONE of the following:
1. Double-click the zip file to
extract the files.
2. Right-click and select Extract files.
If your
computer do not have the WinZip software installed, you may download a free
trial version from the link below.
WinZip Free Trial
Version
Recommended
Duplicator Firmware Update Procedure
- Put
a blank CD in your PC's built-in CD/DVD burner.
- Use
appropriate program(s), drag and drop the updated firmware file(s) you
received directly into the CD Drive folder to create a firmware CD.
- Power
on the duplicator.
- Load
the firmware CD you created into the Reader drive of your duplicator.
- Use
directional arrow (?or ?) to scroll through menu options until LCD display
shows "10. Utility". Press <ENT> button to select the
option.
- Use
directional arrow (?or ?) to scroll through menu options until LCD display
shows "8. Update BIOS". Press <ENT> button to select the
option & initiate the firmware update process. WARNING: DO NOT SHUT OFF THE DUPLICATOR WHILE THE FIRMWARE
UPGRADE IS IN PROGRESS OR YOU MAY DAMAGE THE UNIT!
- Once
firmware update is completed, the LCD display will show "Pass" and
eject the CD.
- LCD
display will prompt you to power off the duplicator. Wait for 5 seconds before
power on the duplicator again to complete the firmware update
process.
Disclaimer
The
firmware you have selected to download is provided to you by Amamax Inc.
Although special attention is taken to make sure that this download will not
harm your duplicator controller or system in any way, please note that you flash
your controller with this firmware at your own risk. Amamax Inc will
not be held responsible for any damage to your duplicator controller or
system.
By downloading and
flashing or using this firmware, you agree to accept all responsibility and
accept that by doing so you will have no legal right to compensation
from Amamax Inc. if problems should arise.
BY USING THE FIRMWARE YOU
EXPRESSLY ASSUME ALL RISK OF LOSS ASSOCIATED WITH ANY DATA LOSS OR DAMAGE
ALLEDGED TO HAVE BEEN CAUSED BY THE FIRMWARE.
