The Acard ARS-2039A DVD/CD Duplicator Barbone
(Controller + Case + Power Supply) is a standalone copy controller
supporting 16X/18X/20X speed in full burning. If it detects only 6 / (4) medias,
it will copy in 12X / (16X) speed. It doesn't need connecting to a computer or
require much learning. Simply through the LCD and the 4 buttons on the panel you
can use the copy controller to back up data, audio or video CD/DVD quickly.
ARS-2039A is quite fit for general offices.
ARS-2039A Copy Smart Plus has a user-friendly interface. It doesn't need extra training or installation of software. Its 1-to-9 burning is a humanized design.
ARS-2039A Copy Smart Plus is exactly a precious product of technology. It can be used as a standalone copy controller. In addition, if you have purchased ACARD AEC-4420P USB link, you can connect it to the computer, to ARS-2039A, and to one of the DVD writers that are connected with ARS-2039. Thus, ARS-2039A becomes an external writer for the computer. When the hardware is used together with ACARD Ha! DVD Burner, the combination will be the best solution.
Standalone IDE to IDE DVD copy controller
Totally independent without installing hardware or software
Supports a Sata 3.5" hard drive
Supports high-speed 1-to-9 DVD burning
Shows messages on LCD
Provides optional functions to extend application
ACARD ATP-865 IDE processor
32-bit RISC CPU
64MB DDR memory
8 independent IDE interface channel
2 X 16 LCD
4 membrane buttons on the panel
512KB flash memory for boot loader
2MB flash memory for copy code
Firmware update by DVD-ROM
Upright external case 11/12 X 5.25"
Power supply of 300W
ATA133 cable (35cm)
Digital DVD-ROM x 1
Digital DVD writer x 9
Hard drive (optional)
Power Magic CD/DVD duplicator
tower case is the cutting-edge solution for even the most complex or challenging
duplication requirements. The sleek new design of Ares case offers complete
flexibility while meeting the demands of an ever-changing
This standalone duplicator case allows you to carry out duplicator requirement for building a new DVD duplicator, CD Duplicator . It is initiated with the simple press of a button without software. (Optional Contoller Required). The CDR/DVD Duplicator is designed for the users who are looking a way of making instant copies of original CD/DVD data. Our duplicator cases were specially designed for any duplicator controller such as Acard Wytron Athena or Apollo controllers. .All duplicator cases equipped with screw set and power cord.
|Up to 9 Target (DVD-RW/CD-RW drives can be installed)|
|500W w/120mm Fan Included|
|11 x 5.25" External, 3x 3.5" Internal|
|Two 80mm can be install (Optional)|
450mm x 190mm x 725mm
|Steel (0.8 mm)|
|One year Amamax|
Parts included in package: